Dell PowerVault 720N Command Reference Manual Download Page 209

Page: 209 / 606

CIFS Administration 7-9

6HWWLQJ8SD*XHVW$FFRXQW

To set up a guest account, use the following

options

command:

RSWLRQVFLIVJXHVWBDFFRXQW

DFFRXQWBQDPH

where

account_name

is the name of the guest account, usually

guest

nobody

which is a preconfigured account in the

/etc/passwd

file.

If you are using UNIX-style authentication, set the guest account to the name of an

account in the UNIX password database, typically

guest

, which is mapped to the

UNIX account

nobody

with the same access rights as the user

everyone

'LVDEOLQJ*XHVW$FFHVV

To disable guest access, use the following

option

command:

RSWLRQVFLIVJXHVWBDFFRXQW

ZLWKD««DV

DFFRXQWBQDPH

*HQHULF8VHU$FFRXQWV

If you are using Windows NT domain authentication, a generic user account is

mapped by default with the name pcuser. The generic user account enables users

who meet the criteria described in this section to connect to NTFS or mixed qtrees on

the filer. For information about qtrees, see Chapter 10, Qtree Administration, or

FilerView on-line help.

NOTE: For generic user accounts to be active, pcuser must be an account in the /etc/

passwd file.

:KR&DQ8VHWKH*HQHULF8VHU$FFRXQW

To use the generic user account, a user must

be authenticated

be in a trusted domain

not have an entry in the UNIX password database

All users of the generic user account have the same UNIX rights and the Windows NT

rights granted by their Windows NT group membership because they appear as one

account to the system.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 209 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: