Dell PowerVault 720N Command Reference Manual Download Page 223

Page: 223 / 606

CIFS Administration 7-23

5HPRYLQJD8VHURU*URXS:LWKWKHFLIVDFFHVVGHOHWH

&RPPDQG

If a user or group no longer exists, you can remove the corresponding entry from an

ACL. Use the following command syntax to remove an entry in an ACL:

FLIVDFFHVVGHOHWH

VKDUH

XVHU

JURXS

Following are some examples of removing entries from the

library

share.

The following command removes the

engineering

group from the

library

share.

FLIVDFFHVVGHOHWHOLEUDU\HQJLQHHULQJ

The following command removes the user

joed

from the

library

share.

FLIVDFFHVVGHOHWHOLEUDU\GRPDLQ?MRHG

'LVSOD\LQJ$FFHVV5LJKWVWRDQ17)6)LOH

$FFHVV5LJKWV'LVSOD\0HWKRGV

You can display access rights to an NTFS file from Windows.

'LVSOD\LQJ$FFHVV5LJKWV)URPWKH:LQGRZV'HVNWRS

To display access rights to a file from the Windows desktop, follow these steps:

Right-click a file and choose Properties from the pop-up menu.

Result:

The Properties sheet appears.

2. Click the Security tab.

Result:

If the file is a Windows file, the Security sheet appears.

3. Click Permissions.

Result:

Permissions are displayed.

&KDQJLQJ81,;3HUPLVVLRQVDQG'26

$WWULEXWHV)URP:LQGRZV

+RZWRFKDQJH81,;SHUPLVVLRQV

Some files and directories on the filer have both Windows and UNIX-style permis-

sions. You can change Windows-style permissions from Windows by editing

Windows permissions. To change UNIX permissions in a UNIX file system from the

Windows desktop or to change DOS attributes, you use the SecureShare Access tool.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 223 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: