Dell PowerVault 720N Command Reference Manual Download Page 134

Page: 134 / 606

4-10 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

2. Edit the

/etc/rc

file in the root volume to make sure that the option specifying the

DNS domain name is set and that the option to enable DNS is set to On.

For example:

RSWLRQVGQVGRPDLQQDPH

FRP

RSWLRQVGQVHQDEOHRQ

3. Reboot the filer or enter the commands at the filer prompt.

Result:

DNS is now enabled. You no longer have to update the filers

/etc/hosts

file in the root volume every time you add a new host to the network,

unless you specify files first in the

/etc/nsswitch.conf

file in the root volume.

'LVDEOLQJ'16

To disable DNS, enter the following command or put the command in the

/etc/rc

file in

the root volume to make the change permanent:

RSWLRQVGQVHQDEOHRII

Changing your DNS domain name:

To change your DNS domain name, enter the

following command or put the command in the

/etc/rc

file in the root volume to make

the change permanent:

RSWLRQVGQVGRPDLQQDPH

GRPDLQQDPH

8VLQJ1,6

The filer includes NIS client capabilities to query NIS servers for host-name-to-IP-

address and IP-address-to-host-name translation services.

Because the

nsswitch.conf

file already enables you to specify the order in which

the filer finds password information, you do not need to use + or - entries in the filers

/etc/passwd

file in the root volume. Any ex or - entries are ignored.

1,60DSVWKH)LOHU8VHV

The filer uses the following NIS maps:

KRVWVE\QDPH
KRVWVE\DGGU
SDVVZGE\QDPH
SDVVZGE\XLG
SDVVZGDGMXQFW
JURXSE\QDPH
JURXSE\JLG
QHWJURXSE\KRVW

Shadow password information is obtained from the

passwd.byname

map.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 134 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: