Dell PowerVault 720N Command Reference Manual Download Page 128

Page: 128 / 606

4-4

Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

$ERXW0,%*URXS&RQWHQWV

The top-level groups in the custom MIB and the information they contain are

described in Table 4-1.

$ERXW7UDSV

You use the

snmp traps

command to inspect the value of MIB variables periodically

and send an SNMP trap to the machines on the traphost list whenever that value

meets the conditions you specify. The traphost list specifies network management

stations that receive trap information.

You use the SNMP third-party applications on your network management station to

process the trap information. For example, you can set a trap to monitor the fans on a

filer and have the SNMP application on your network management station put a flash-

ing message on your console that tells you that a fan has ceased operating.

You can set traps on any numeric variable in the filers MIB.

7DEOH0,%*URXS&RQWHQWV

*URXSQDPH

&RQWHQWV

FLIV

Statistics like those displayed by the

cifs stat

command.

filesys

Information related to the file system, including the equiva-

lent of the

maxfiles

and

commands, and some of the

information from the

snap list

command.

nfs

Statistics like those displayed by the

nfsstat

command,

including statistics for each client if per-client statistics are

enabled. The per-client statistics are indexed by client IP

addresses.

product

Product-level information, such as the software version string

and the system ID.

quota

Information related to disk quotas, including the output of

the

quota report

command. To access quota information,

quotas must be turned On.

For more information about quotas, see Restricting or Track-

ing Disk Usage by Using Disk Quotas in Chapter 11.

raid

Information about RAID equivalents to the

sysconfig -r

output.

For more information about

sysconfig

, see Chapter 17,

System Information and Performance.

sysstat

System-level statistics, such as CPU uptime, idle time, and

the number of kilobytes transmitted and received on all net-

work interfaces.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 128 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: