Dell PowerVault 720N Command Reference Manual Download Page 230

Page: 230 / 606

7-30 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

6WHS

To disable CIFS access logging, enter the following command:

RSWLRQVFLIVDFFHVVBORJJLQJHQDEOHRII

6SHFLI\LQJWKH$FWLYH(YHQW/RJ

'HVFULSWLRQ

Use this procedure to specify the active event log. You follow this procedure when

you want to specify the name of a file to which the system writes access logging

information. You can do this at any time. After you complete this procedure, if access

logging is enabled, the system writes access logging information to the file you

specified.

3UHUHTXLVLWHV

You must have the path name of the file to use. This file must be in an existing writ-

able directory.

6WHS

To specify the active log, center the following command at the command line:

RSWLRQVFLIVDFFHVVBORJJLQJILOHQDPH

SDWKBQDPH

path_name

is the path name in UNIX format of the file to which you want the system

to write access logging information.

6HWWLQJD6\VWHP$&/RQD)LOH

'HVFULSWLRQ

Use this procedure to set a system ACL (SACL) on a file. You must complete this pro-

cedure to monitor access activity on a file. You complete this procedure when you

have decided to monitor access to a file by specified users or groups. The procedure

is the standard Windows NT procedure for setting a SACL on a file. After you com-

plete this procedure, if access logging is enabled, the filer logs accesses to the file by

the users or groups you specified.

3UHUHTXLVLWHV

You must have the following items to complete the procedure:

The name of the file you want to monitor

The name of the users or groups whose access to the file you want to monitor

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 230 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: