manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 349 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 349

Data Replication Using SnapMirror16-5

When it is time to update the mirror, another snapshot is created on filerA. The 

snap 

list

 command on filerA generates the following display after 

/vol/vol1/filerB_vol2.2

 is 

created on filerA:

Volume vol1

working....

%/used

%/total

date          name

-------- ----------  ------------  --------

0% ( 0%) 0% ( 0%) 

 Nov 17 10:52  filerB_vol2.2 (busy)

0% ( 0%) 0% ( 0%) 

 Nov 17 10:51  filerB_vol2.1 

1% ( 0%) 0% ( 0%) 

 Nov 17 10:00  hourly.0 

1% ( 0%) 0% ( 0%)  

Nov 17 00:00  nightly.0 

1% ( 0%) 0% ( 0%)  

Nov 15 16:00  hourly.1 

1% ( 0%) 1% ( 0%) 

 Nov 15 15:00  hourly.2 

After 

filerB_vol2.2

 is transferred from filerA to filerB, both the 

filerB_vol2.1

 and 

filerB_vol2.2

 snapshots exist on filerB.

On filerA, however, 

filerB_vol2.1

 is no longer needed and is deleted; only 

filerB_vol2.2

 

remains.

&RQVHTXHQFHVRI'HOHWLQJD5HTXLUHG6QDSVKRW

The filer fails to replicate data if it cannot find the required snapshots in the source 

and destination volumes. This section provides an example illustrating what happens 

if you inadvertently delete a snapshot required for data replication.

In this example, data is replicated from 

/vol/vol1

 of filerA to 

/vol/vol2

 of filerB. Suppose 

you use the 

snap delete

 command on filerA to delete the 

filerB_vol2.2 

snap-

shot. When filerB tried to update the mirror according to the schedule in the 

snapmirror.conf

 file, it could not find the snapshot to determine what incremental 

changes are required in the mirror.

As a result, filerB displays the following error message.

The source filer requires a complete transfer. The destination volume 

is online and must be offline for a complete transfer.

FilerA displays the following error message:

Destination filerB could not accept a complete transfer.

These messages mean that filerB tries to create a baseline version of the mirror, but 

doing so requires that the mirror on filerB be taken off-line.

To proceed, use the 

vol offline

 command to take the mirror off-line and reboot 

the filer. At the next scheduled mirror update, the filer creates a baseline version of 

the mirror.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments