manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 547 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 547

Command ReferenceA-133

NAME

httpd.mimetypes - map of file suffixes to MIME Content-Type

SYNOPSIS

/etc/httpd.mimetypes

DESCRIPTION

For HTTP/1.0 and higher protocols, a MIME header is returned in the reply of 

every GET request. This header includes a ”Content-Type” field, whose contents 

is determined by examining the suffix of the file being transmitted.

The 

/etc/httpd.mimetypes

 file contains the mapping of filename suffixes to 

MIME Content-Type. The format of each line is: suffix, Content-Type. Comments 

are introduced with a ”#”.

The filer is not shipped with the 

/etc/httpd.mimetypes

 file. Instead, the filer’s 

system files include a sample file named 

/etc/httpd.mimetypes.sample

. 

Before you start using HTTP, make a copy of 

/etc/httpd.mimetypes.sample

 and 

name the copy 

/etc/httpd.mimetypes

.

If the file 

/etc/httpd.mimetypes

 is not installed, the HTTP server looks for the 

file 

/etc/httpd.mimetypes.sample

 as a fallback.

EXAMPLE

#map

 

.ps

 

files

 

to

 

PostScript

ps

 

application/postscript

httpd.mimetypes

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments