Dell PowerVault 720N Command Reference Manual Download Page 516

Page: 516 / 606

A-102 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

NAME

useradmin - add, delete or list administrative users

SYNOPSIS

useradmin useradd

[-c comments] login_name

useradmin userdel

login_name

useradmin userlist

[user_name_list]

DESCRIPTION

The

useradmin

command can be used to add, delete, or list administrative

users.

The

useradd

option is used to add administrative users. The user name can be

up to

32 characters

long. The user name can contain any printable

ASCII

charac-

ters except the following characters:

space | * + , / : ; < = > ? [ \ ]

All users added through the

useradd

option have the same privilege level as root.

Optionally, any comment about the user being added could be provided. Com-

ments about the user should be no longer than 128 characters and should not

contain the character : (colon).

When users are added they are prompted for the password twice. The password

is case sensitive and it has the following restrictions:

it should be at least 6 characters long

it should contain at least two alphabets

it should contain at least one digit or special character

The

userdel

option can be used to delete any non-root administrative user.

The

userlist

option lists all non-root users if no user name is provided. The

user-

list

option can also be invoked with a list of users to list information about only

those users.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 516 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: