Dell PowerVault 720N Command Reference Manual Download Page 184

Page: 184 / 606

6-2

Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

([SRUW6SHFLILFDWLRQ'HWHUPLQHV$FFHVV3ULYLOHJHV

The export specification specifies the privileges that clients have to mount and access

the filer directory path. The format is as follows:

-root=

list,-access=list,-ro=list,-rw=list

2QHNH\ZRUGLVUHTXLUHG

The keywords

-root

-access

-ro

, and

-rw

are all optional; however, you must

include at least one keyword in an export entry.

:KDWWKHOLVWYDULDEOHUHSUHVHQWV

The

list

variable represents a list that includes one or more

host names

netgroup names

subnets

<RXFDQFRPELQHHOHPHQWVLQDQHQWU\

You can combine host names, netgroup names, and subnets in an entry, as shown in

the following example:

-root=adminhost:administrators,-rw=blender:pcusers:123.45.67.0/

([DPSOHH[SRUWLQJGHIDXOWILOHUYROXPHWRDGPLQLVWUDWLRQKRVW

The following line exports the root directory of the default filer volume to the adminis-

tration host with root privileges. The administration host can mount the directory,

change permissions and ownerships, and create and delete directories and files.

/vol/vol0 -root=adminhost

([DPSOHH[SRUWLQJKRPHGLUHFWRU\WRDGPLQLVWUDWLRQKRVWDQGFOLHQWV

The following line exports the home directory from the default filer volume to the

administration host and two clients. The administration host has root privileges and

can mount the directory, change permissions and ownerships, and create and delete

directories and files. The clients can mount the directory and create and delete

directories.

/vol/vol0/home -root=adminhost,-rw=blender:mixer

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 184 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: