Dell PowerVault 720N Command Reference Manual Download Page 317

Page: 317 / 606

Data Recovery 13-3

5XOHVIRU8VLQJWKHUHVWRUH&RPPDQG

Follow these rules when you enter the

restore

command:

Specify no more than one function key.

Specify multiple options without intervening spaces.

Enter the arguments for each option in the order that you specify the options.

Separate each argument from the next with a space.

Place the subtree parameter after the last argument.

7KHUHVWRUH&RPPDQG)XQFWLRQ.H\V

Table 13-1 describes the function keys for the

restore

command.

7KHUHVWRUH&RPPDQGRSWLRQV

Table 13-2 describes the options for the

restore

command.

7DEOHUHVWRUH&RPPDQG)XQFWLRQ.H\V

.H\

0HDQLQJ

Rebuilds the file system or subtree. If you are applying incrementals,

this must be the only option specified.

After the

restore

command is interrupted, this function key

restarts data recovery from the last tape file used successfully by the

command.

Lists all the file names on a tape. If you specify a path name, only the

files in the path name are listed.

Extracts an individual file or subtree from the backup.

7DEOHUHVWRUH&RPPDQG2SWLRQV

2SWLRQ

$UJXPHQW

0HDQLQJ

number

Specifies the blocking factor. Use the same argu-

ment for the

option in the

dump

command.

tape_file

Specifies the name of the tape file. If you specify

restore

reads from standard input.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 317 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: