manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 398 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 398

19-6 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

'HVFULSWLRQ

Specifies a second element for a single-element NetBIOS computer name. This ele-

ment is case-sensitive. You use this option to isolate a group of computers on a 

network that communicate only with other computers with the identical NetBIOS 

Scope ID.

This option is not recommended if you are using DNS for name resolution because 

NetBIOS Scope IDs and DNS are incompatible.

7KHFLIVVHDUFKBGRPDLQV2SWLRQ

'HIDXOW

None

'HVFULSWLRQ

Specifies a list of domains that trust each other to search for a mapped account. The 

argument for the option is a comma-separated list that is searched in order. If no list is 

supplied, all domains are searched. You use this option to limit searches if you used an 

asterisk for a domain name in the usermap.cfg file.

7KHFLIVVKRZBVQDSVKRW2SWLRQ

'HIDXOW

FALSE

'HVFULSWLRQ

Specifies whether to show the 

~snapshot

 directories in folders. To show the snap-

shot directories, set this option to TRUE.

7KHFLIVV\POLQNVF\FOHJXDUG2SWLRQ

'HIDXOW

On

'HVFULSWLRQ

If an object being accessed by a CIFS client is a symbolic link, the 

cifs.symlinks.cycleguard

 option, when set to On, eliminates the possibil-

ity of cyclic directories. It does so by preventing the following of symbolic links that 

contain the “dot” (“.”) or “dot-dot” (“..”) component—symbolic links that could refer 

to a directory higher in the same tree. With the 

cifs.symlinks.cycleguard

 

option set to Off, if you are careful, you can use symbolic links having “dot” or “dot-

dot” components. 

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments