Dell PowerVault 720N Command Reference Manual Download Page 224

Page: 224 / 606

7-24 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

To use the SecureShare Access tool from a client, you must install the tool on the cli-

ent. For instructions about downloading the SecureShare Access tool, see the

Software and Firmware Upgrade Guide

Start Here

NOTE: To change UNIX permissions, you must understand them. Explaining UNIX

permissions is outside the scope of this guide. Consult literature about UNIX for an

explanation of UNIX permissions.

'LVSOD\LQJ6HFXUH6KDUH$FFHVV

To display SecureShare Access, follow these steps.

Select the files and directories whose permissions you want to change.

The items are highlighted.

2. Right-click one of the items you selected.

A pop-up menu appears.

3. Choose Properties from the pop-up menu.

The Properties dialog box appears.

4. Click the SecureShare tab.

SecureShare Access appears.

&KDQJLQJWKH3HUPLVVLRQVRID6LQJOH,WHP

If you select only one item, SecureShare Access appears.

&$87,216HFXUH6KDUH$FFHVVKDVQRXQGRIHDWXUH8VHLWYHU\FDUHIXOO\

TWUHH6HFXULW\6W\OH(IIHFWV

The security style of the qtree from which you select an item has the following

effects:

In NTFS-style qtrees, all the edit fields and check boxes are disabled. Use stan-

dard Windows NT tools to manipulate NTFS files.

In NFS-style qtrees, the Has ACL check box is meaningless and is disabled.

In mixed-style qtrees, if a file has an ACL, the ACL is removed when you click the

OK or Apply button. A dialog box prompts you to confirm that this is what you

want.

NOTE: If you click OK or Apply on any page or tab of a Properties sheet, it puts into

effect all changes that you made on all pages or tabs of the Properties sheet.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 224 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: