manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 396 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 396

19-4 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

'HVFULSWLRQ

When On, directories in the path to a file are not required to have the 'X' (traverse) 

permission. 

NOTE: This option does not apply in UNIX qtrees or volumes.

7KHFLIVJXHVWBDFFRXQW2SWLRQ

'HIDXOW

None

'HVFULSWLRQ

When you leave 

cifs.guest_account

 blank, a CIFS user can log in to the filer 

without an account in the password database, provided that a domain controller 

authenticates the user. 

When you set 

cifs.guest_account

 to the name of an account in the NIS 

passwd

 map or 

/

etc/passwd 

(typically guest), guest access to the filer is enabled, and 

the user has the UNIX user ID and the group ID of the guest account. For more infor-

mation, see “Enabling Guest and Generic Access” in Chapter 7.

7KHFLIVKRPHBGLU2SWLRQ

'HIDXOW

None

'HVFULSWLRQ

Specifies the complete path name of the “homes directory.” The directories under 

this path should have the names of users as their names. When a CIFS user connects 

to the filer and there is a directory name that exactly matches the user’s name, the 

user sees a share of that name (truncated to 12 characters) that is the user’s home 

directory. Only the user can access the home directory using this share. All other 

users are denied access.

7KHFLIVLGOHBWLPHRXW2SWLRQ

'HIDXOW

18000

'HVFULSWLRQ

Specifies the number of seconds that elapse before the filer disconnects an idle ses-

sion. The value can range from 600 through 4,000,000 (effectively infinite).

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments