Dell PowerVault 720N Command Reference Manual Download Page 320

Page: 320 / 606

13-6 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

It is less likely that someone inadvertently terminates the

restore

command.

If you enter a

restore

command on the console, it could be terminated by a

Ctrl-C entered on a host connected to the filer using

telnet

However, if you enter the

restore

command on the console, you can read and

respond to screen messages displayed by the command. For example, the command

might prompt you for another tape to complete the recovery.

6WHSV

Follow these steps to restore files to the filer:

Place the tape containing the first tape file of the backup in the tape drive.

2. Enter the

restore

command as follows:

UHVWRUH>

IXQFWLRQBNH\

RSWLRQV

DUJXPHQWV

VXEWUHH

3. If prompted, insert the next tape in the backup.

4. Repeat Step 3 until the restore is complete.

3HUIRUPLQJD)XOO5HVWRUHRID9ROXPH

&RQWDLQLQJTWUHHV

'HVFULSWLRQ

The

restore

command does not restore qtree information. For example, if you

need to restore a volume or a part of a volume that contains qtrees, you must first

create the qtrees into which data is to be restored.

6WHSV

Follow these steps to fully restore a volume containing qtrees:

Obtain the record of the qtree information as of the last volume backup.

2. Create all qtrees according to the record.

3. Set the security style of each qtree to the value that is the same as when the vol-

ume was backed up.

4. If you want to recover the entire volume with one

restore

command, go to

Step 5. Using one

restore

command requires less time for recovering the

entire volume than using multiple

restore

commands.

If you want to use multiple

restore

command to recover all qtrees in the vol-

ume, go to Step 6. Using multiple

restore

commands enables you to quickly

recover those qtrees that are needed the most.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 320 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: