Dell PowerVault 720N Command Reference Manual Download Page 408

Page: 408 / 606

19-16 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

'HVFULSWLRQ

Prevents the update of the access time (atime) on an inode when a file is read. This

option prevents inode updates from contending with reads from other files. Use it

only on a filer with extremely high read traffic (for example, on a news server used by

an Internet access provider or on a filer used mainly as an HTTP server).

7KHQRVQDS2SWLRQ

'HIDXOW

Off

'HVFULSWLRQ

Temporarily disables automatic snapshots.

7KHQRVQDSGLU2SWLRQ

'HIDXOW

Off

'HVFULSWLRQ

Makes invisible the snapshot directory thats usually present at the client mount point

or at the root of the CIFS share. It also turns off access to the snapshot directory and

all snapshot directories under the mount point or the root of the CIFS share.

After you toggle this option, you might not notice the effect immediately because the

information about the snapshot directories might still be in the clients attribute cache.

To force the change to take effect immediately, unmount and remount the file system.

7KHQYIDLO2SWLRQ

'HIDXOW

Off

'HVFULSWLRQ

Sets the filer to check for NVRAM errors during boot up. Change the value to On

when you want the filer to send error messages to notify you of NVRAM errors that

can effect the validity of database files.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 408 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: