Dell PowerVault 720N Command Reference Manual Download Page 563

Page: 563 / 606

Command ReferenceA-149

NAME

shadow - shadow password file

SYNOPSIS

/etc/shadow

DESCRIPTION

The

shadow

file provides more secure storage for the users password (which

would otherwise be in

/etc/passwd).

When the password field of an entry in

/etc/passwd

is empty,

/etc/shadow

must contain a corresponding entry with

the same user name but a non-empty encrypted password.

username:password:

The following list explains the required fields:

username

The users login name, not more than eight characters.

password

The users password, in an encrypted form that is generated by the

UNIX passwd function.

There can be other fields in the

/etc/shadow

file following the : after the

password.

EXAMPLE

Here is a sample

shadow

password

file entry:

dave:Qs5I6pBb2rJDA:

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 563 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: