manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 358 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 358

16-14 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

6WHSVWR'LVDEOH'DWD5HSOLFDWLRQIRU2QH9ROXPH

Follow these steps to disable data replication for one volume. These steps disable vol-

ume replication until you reenable it.

1.

Comment out the entry in the 

/etc/snapmirror.conf

 file by preceding the entry 

with a pound sign (#). 

2. Enter the 

vol snapmirror on

 command to make the filer reread the 

/etc/

snapmirror.conf

 file. 

Result: 

If the filer is currently transferring data from that volume, the transfer 

stops immediately.

6WHSVWR'LVDEOH'DWD5HSOLFDWLRQ:KLOH'DWD7UDQVIHU,V

LQ3URJUHVV

Follow these steps to disable data replication while data transfer is in progress. These 

steps stop the replication temporarily; at the time of the next scheduled update, data 

replication starts up again.

1.

Enter the 

vol copy status

 command to display the operation numbers of the 

volume copy.

Result: 

Because SnapMirror uses the 

vol copy

 command to transfer data, the 

vol copy status

 command displays all volume copy operations, including the 

one for replicating a volume.

2. Enter the 

vol copy abort

 command to terminate the volume copy operation.

Result: 

The filer stops copying data and displays messages similar to these:

LPDJHRSHUDWLRQLVQRZEHLQJDERUWHG

LPDJHRSHUDWLRQLVQRZEHLQJDERUWHG

&KHFNLQJ'DWD5HSOLFDWLRQ6WDWXV

'HVFULSWLRQ

If you want to know how much data has been copied to the mirror or whether a filer is 

using resources for replicating data, you can use the 

vol snapmirror status

 

command at any time to check the status of data replication.

3UHUHTXLVLWH

SnapMirror must be enabled before you can check the status of data replication. 

Otherwise, the following error message is displayed:

Snapmirror is turned off.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments