Dell PowerVault 720N Command Reference Manual Download Page 502

Page: 502 / 606

A-88 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

NAME

setup - update filer configuration

SYNOPSIS

setup

DESCRIPTION

setup

queries the user for the filer configuration parameters such as hostname,

IP address, and timezone. It installs new versions of

/etc/rc

/etc/hosts

/etc/

exports

/etc/resolv.conf

/etc/hosts.equiv

, and

/etc/dgateways

to reflect the

new configuration. When

setup

completes, the configuration files have been

updated, but their new contents do not take effect until the filer is rebooted (see

reboot

). The old contents of the configuration files are saved in

rc.bak

exports.bak

resolv.conf.bak

hosts.bak

hosts.equiv.bak

, and

dgateways.bak

One piece of information that

setup

requests is the name and IP address for

adminhost

. In

/etc/exports

adminhost

is granted root access to

so that it can

access and modify the configuration files in

/etc

. All other NFS clients are

granted access only to

/home

. If no

adminhost

is specified, then all clients are

granted root access to

. This is not recommended for sites where security is a

concern.

If an adminhost is specified, then an additional line is added to the

/etc/hosts

file

to point the default mailhost to the adminhost.

If a default gateway is provided to setup, it will be used in

/etc/rc

to specify a

default route (see

route

), and will also be used as the first entry in

/etc/

dgateways

The

hostname

that is provided to

setup

is used to construct default names for all

of the configured network interfaces. Ethernet interfaces are given names

host-

name

hostname

, and so on.

FILES

/etc

directory of filer configuration and administration files

/etc/rc

system initialization command script

/etc/exports

directories exported by the server

/etc/hosts

host name data base

/etc/hosts.equiv

list of hosts and users with rsh permission

/etc/resolv.conf

list of DNS name servers

/etc/dgateways

list of preferred default gateways for routed

/etc/nsswitch.conf

list of preferred name services

setup

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 502 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: