Dell PowerVault 720N Command Reference Manual Download Page 67

Page: 67 / 606

Filer Administration Basics 2-9

&DXWLRQ

You are not prompted for a password when deleting a user.

6WHS

To delete an administrative user, enter the following command:

XVHUDGPLQXVHUGHO

XVHUBQDPH

user_name

is the login name you want to delete.

/LVWLQJ$GPLQLVWUDWLYH8VHUV

'HVFULSWLRQ

Use the

userlist

option to get a list of administrative users on a filer. You can use

the

userlist

option at any time to determine whether you need to add or delete

administrative users.

6WHS

To list one or more administrative users using a console,

telnet

rsh

, enter the

following command:

XVHUDGPLQXVHUOLVW

>XVHUQDPHBOLVW@

username_list

is a space-separated list of login names you want to display.

NOTE: If you do not specify any user names, all administrative users are listed.

&KDQJLQJDQ$GPLQLVWUDWLYH8VHU

3DVVZRUG

'HVFULSWLRQ

Use the

passwd

command from a console,

telnet

, or

rsh

to change your adminis-

trative password on a filer at any time. Changing your password at regular intervals

can provide you with better filer security.

5HVWULFWLRQV

When you use

telnet

or a console, the

passwd

command prompts you for the user

name if administrative users, other than root, exist.

The

passwd

command only accepts arguments when you use

rsh

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 67 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: