Dell PowerVault 720N, Command Reference Manual, Page: 418 / 606

A-4 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide
NAME
arp - address resolution display and control
SYNOPSIS
arp
hostname
arp - a
arp - d hostname
arp - s
hostname ether
_
address
[ temp ] [ pub ]
DESCRIPTION
The arp command displays and modifies the tables that the address resolution proto-
col uses to translate between Internet and Ethernet addresses.
With no flags, arp displays the current ARP entry for
host_
n
ame
. The host may be
specified by name or by number, using Internet dot notation.
OPTIONS
- a Displays all of the current ARP entries.
- d Deletes an entry for the host called hostname .
- s Creates an ARP entry for the host called
hostname
with the Ethernet
address
ether
_
address
. The Ethernet address is given as six hex bytes sepa-
rated by colons. The entry will be permanent if the words following - s
includes the keyword temp . Temporary entries that consist of a complete
Internet address and a matching Ethernet address are flushed from the arp
table if they haven’t been referenced in the past 20 minutes. A permanent
entry is not flushed.
If the words following - s include the keyword pub , the entry will be ”pub-
lished”; i.e., this system will act as an ARP server, responding to requests
for
hostname
even though the host address is not its own.
SEE ALSO
ifconfig
arp