manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 178 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 178

5-22 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

6DPSOH2XWSXW

The following sample output shows the output of statistics with the 

-d

 option.

wcc -d

mday (UID 10050) from 10.100.4.41 => NT-DOMAIN\mday*

Total WCC entries: 3; oldest is 127 sec.

Total Administrator-privileged entries: 1

 * indicates members of "BUILTIN\Administrators" group

The following sample output shows the output of statistics with the 

-v

 option used 

twice.

cc -dvv

mmm (UID 1321) from 10.100.4.41 => NT-DOMAIN\mmm

        ***************

        UNIX uid = 1321

        NT membership

                NT-DOMAIN\mmm

                NT-DOMAIN\Domain Users

                NT-DOMAIN\SU Users

                NT-DOMAIN\Installers

                NT-DOMAIN\tglob

                NT-DOMAIN\Engineering

                BUILTIN\Users

        User is also a member of Everyone, Network Users,

        Authenticated Users

        ***************

mday (UID 10050) from 10.100.4.41 => NT-DOMAIN\mday*

        ***************

        UNIX uid = 10050

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments