manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 238 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 238

7-38 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

6. To disconnect one or more users, do one of the following:

‡

To disconnect a single user or selected users, select them, then click 

Disconnect. 

‡

To disconnect all users, click Disconnect All.

Result: 

The selected users are disconnected.

NOTE: If at least one of the selected users has open resources, an alert box 

appears for you to confirm or cancel your command.

8VLQJWKHFLIVWHUPLQDWH&RPPDQG

You can stop CIFS service for a specific client or shut down CIFS service from the filer 

by using the 

cifs terminate

 command. Always terminate all CIFS sessions before 

you reboot or turn Off the filer. 

You can specify a single client or all clients, and the time delay, in minutes, before the 

CIFS sessions are terminated, as shown in the following command syntax:

FLIVWHUPLQDWH>

FOLHQW

@>>W@

WLPH

@

Table 7-8 describes the variables.

7KHFLIVWHUPLQDWH&RPPDQG1RW3HUVLVWHQW

The 

cifs terminate

 command disables CIFS sessions only between the time you 

enter the command and the next reboot. After each reboot, if your filer is licensed and 

configured to run CIFS, the filer automatically starts CIFS service. If you want to pre-

vent CIFS from restarting after a reboot, remove the 

/etc/cifsconfig.cfg

 file from the 

filer or rename the file.

7LPH'HOD\

You can delay the termination of CIFS service after you enter the 

cifs terminate

 

command. 

'HIDXOW7LPH'HOD\

The default time delay is five minutes. 

7DEOHFLIVWHUPLQDWH&RPPDQG9DULDEOHV

9DULDEOH

'HVFULSWLRQ

client

Name of the client for which you are 

ending a CIFS session.

time

Number of minutes before the termi-

nation happens.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments