manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 529 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 529

Command ReferenceA-115

NAME

tape - information on filer tape interface

DESCRIPTION

The filer supports up to four local tape drives (tape drives connected directly to 

the system). The tape drive interface follows a UNIX-like device name allowing 

use of a 

rewind

, 

norewind

 or 

unload/reload

 device. The format of a filer tape 

device name is 

c

rst

ud

 where:

c

use 

n

 to specify the 

norewind

 device, use 

u

 to specify the 

unload/reload

 

device, or no flag to specify the 

rewind

 device. The 

norewind

 device will 

not rewind when the tape device is closed. The 

unload/reload

 device is 

used with sequential tape loaders and will unload the current tape volume 

and attempt to load the next tape volume (note that the server will wait up to 

one minute for the next volume to become ready before aborting the reload 

of the next volume). The rewind device will rewind the tape volume to 

beginning-of-tape on close.

rst

the 

rst

 portion of the device name is always present and specifies that you 

are requesting a SCSI tape device.

u

the logical unit number of the tape drive to use.

d

the density (or format) to use for tape write operations.

The density specifications for an Exabyte 8505 8mm drive are:

l

Exabyte 8200 format, no compression

m

Exabyte 8200 format with compression

h

Exabyte 8500 format, no compression

a

Exabyte 8500 format with compression

EXAMPLES

The 

sysconfig

 

-t

 command will display the supported tape drives on your system 

and the device names associated with each tape device along with the device’s 

density, or format. The following is an example of the output from a sysconfig 

command on a filer with one tape device attached:

filer> 

sysconfig

 -

t

Tape drive (0.6)  Exabyte 8505 8mm

rst0l  -

rewind device,

format is: EXB-8200   2.5GB

nrst0l -

no rewind device,

format is: EXB-8200   2.5GB

urst0l -

unload/reload device, format is: EXB-8200   2.5GB

rst0m  -

rewind device,

format is: EXB-8200C  (w/compression)

tape

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments