manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 283 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 283

Quotas and Maximum Number of Files11-3

you have not specified a user quota in the 

quotas

 file can use up to 500 MB of 

disk space.

To override a default for a specific user or group, specify a quota for that user or 

group.

7\SH)LHOG

You can enter one of the following values in the Type field to define the quota type:

‡

user: 

If a user quota applies just to a tree and not to the entire volume, specify 

user@

tree

, where 

tree

 is the name of a qtree. If a user quota applies to a vol-

ume other than the root volume, append 

@/vol/

volume

 to the quota type. For 

example, 

user@/vol/

marketing

 means that the user quota applies to the 

marketing

 volume.

‡

group:

 If a group quota applies just to a tree and not to the entire volume, specify 

group@

tree

 where 

tree

 is the name of a qtree. If a group quota applies to a 

volume other than the root volume, append 

@

volume

 to the quota type. For 

example, 

group@/vol/marketing

 means that the group quota applies to the 

marketing

 volume.

‡

tree:

 A tree quota is similar to a disk partition, but you can increase or decrease 

the size of a tree quota at any time.

'LVN)LHOG

Specifies the maximum amount of disk space that the quota target can use. In this 

field, K is equivalent to 1,024 bytes, M means 2^20 bytes, and G means 2^30 bytes. 

If you omit the K, M, or G, the default is K.

If you want to track the disk usage but do not want to impose a disk usage limit on the 

quota target, enter a dash (-) in the disk field.

NOTE: Do not put a blank in the Disk field; it acts as white space. The filer regards the 

following entries as equivalent:

#Quota Target

type

disk

files

/export

tree

75K

/export

tree

75K

)LOHV)LHOG

Specifies the maximum number of files that the quota target can use. Use K to indi-

cate 1,024 files. For example, 75K means 76,800 files. Use M to mean 2^20 and G to 

mean 2^30. You can omit the K, M, or G. For example, if you enter 100, it means the 

maximum number of files is 100. A blank in this field means there is no restriction on 

the number of files that the quota target can use. 

If you want to track the number of files but do not want to impose a limit on the num-

ber of files that can be used by the quota target, enter a dash (-) in the files field.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments