manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 169 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 169

File Sharing Between NFS and CIFS Users5-13

language of the root volume, which is the default language. You use this procedure 

any time you want to create a volume.

After you complete the procedure, the filer stores file names in the volume you cre-

ated using a character set that best fits the language you selected.

3UHUHTXLVLWHV

To complete this procedure, you need the language code of the language you want to 

use. You can get the language code from Table 5-2 in “Languages Supported.” 

&DXWLRQ

Changing the language of a volume after the volume contains files can cause some of 

the NFS encodings to be invalid and is not recommended. 

6WHS

To set the language and character set that a volume uses to store file names, enter 

the following command:

vol create 

volume -l langcode

volume

 is the name of the volume whose language you want to change.

langcode

 is the code for the language you want the volume to use.

'LVSOD\LQJ:KLFK9ROXPH8VHV:KLFK

/DQJXDJH

'HVFULSWLRQ

This procedure displays a list of volumes with the language each volume is configured 

to use. You perform this procedure when you want to know which volume uses which 

language. This is useful in matching clients with languages or deciding whether to 

create a volume to accommodate clients that use a language that you might not have 

a volume for.

6WHS

To display a list of volumes with the language each volume is configured to use, enter 

the following command:

vol status -l

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments