Dell PowerVault 720N, Command Reference Manual, Page: 198 / 606

6-16 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide
([DPSOHQRRSWLRQV
The following lines show the output of the
nfsstat
command when you specify no
options:
nfsstat
Server rpc:
TCP:
calls badcalls nullrecv badlen xdrcall
0 0 0 0 0
UDP:
calls badcalls nullrecv badlen xdrcall
24 0 0 0 0
Server nfs:
calls badcalls
24 0
Server nfs V2: (24 calls)
null getattr setattr root lookup readlink read
-h
Displays statistics for a single client. You must provide the
client’s host name or IP address as an argument to the
-h
option.
‡
To use the
-h
option, you must enable the
nfs.per_client_stats.enable
option by entering
the following command:
options nfs.per_client_stats.enable on
‡
Enable the per-client statistics collection mode as soon
as possible after you start the filer or reset the counters
with
nfsstat -z
. Otherwise,
nfsstat -l
reports
incorrectly low percentages and displays statistics that
include clients that have generated RPC calls but no
NFS calls to the client.
-l
Displays statistics that have been collected for all NFS
clients.
-z
Resets the statistics counters.
7DEOHQIVVWDW&RPPDQG2SWLRQV FRQWLQXHG
2SWLRQ 'HVFULSWLRQ