Dell PowerVault 720N Command Reference Manual Download Page 244

Page: 244 / 606

8-4

Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

The pairs are copied in from a machine on which the user has a password.

7KHHWFKWWSGJURXS)LOH

The

/etc/httpd.group

file contains a

group_id

and a list of

user_ids

in that group in the

following format:

JURXSBLG

XVHUBLG

The lists are copied in from a machine that has a similar list.

:HE3DJH3URWHFWLRQ([DPSOHV

The following

/etc/httpd.access

file restricts access to

/vol/vol0/home/htdocs/private/

spec

to only the user bob:

AuthName polard Private Stuff

require user bob

</Limit GET>

</Directory>

The <Limit GET> and </Limit GET> directives, which might have been imported from

an Apache or NCA Web server, are not supported. To be used on a filer, the file does

not need to be edited to remove the Limit GET directive; the filer ignores the directive

and all other directives not mentioned in this chapter.

The following sample procedure restricts user access to a particular directory:

Enter the following lines in the

/etc/httpd.access

file:

'LUHFWRU\YROYROKRPHKWGRFVSULYDWHVSHFV!

$XWK1DPH6RFLDOFRPPHQWDU\

UHTXLUHJURXSHQJLQHHULQJ

'LUHFWRU\!

2. Enter the following line in

/etc/httpd.group

HQJLQHHULQJEREODUU\QDQF\URVH

The

/vol/vol0/home/htdocs/private/specs

directory is now accessible only to the group

engineering, which consists of the following user IDs:

bob

larry

nancy

rose

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 244 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: