manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 326 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 326

13-12 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

+RZWR8VHD)LOHU7DSH'ULYHWR5HVWRUH

)LOHVWR$QRWKHU6\VWHP

$ERXW7KLV6HFWLRQ

This section describes the requirements for using commands such as 

ufsrestore

 

on another system to restore data from a tape drive attached to the filer. It also 

describes how to specify the tape drive in the command for restoring data.

This section does not discuss the exact commands that you need to enter on the 

other system. Refer to the documentation for the other system to learn about its 

commands for restoring data.

5HTXLUHPHQWV

The filer with the tape drive must allow access from the other system. That is, the 

host or filer from which a 

dump

 (or 

ufsdump

) or 

restore

 (or 

ufsrestore

) com-

mand is issued must be listed in the following configuration files:

‡

The 

/etc/hosts.equiv

 file on the filer with the tape drive. Alternatively, you can 

specify both the host and user in 

/etc/hosts.equiv

. The filer 

/etc/hosts.equiv

 file 

contains entries in this format:

hostname

 [ 

username

 ]

For more information about 

/etc/hosts.equiv

, see the 

hosts.equiv

(5) man page.

‡

The 

/etc/hosts

 file on the filer with the tape drive or in the DNS database if the 

filer is using DNS.

Also, the filer with the tape drive must be added to the other system’s 

/etc/hosts

 file. 

)RUPDWIRU6SHFLI\LQJ)LOHU7DSH'ULYH

In the commands for dumping and restoring, specify the filer tape drive in the follow-

ing format:

filer:device_name

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments