Dell PowerVault 720N Command Reference Manual Download Page 584

Page: 584 / 606

A-170 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

NAME

rshd - remote shell daemon

DESCRIPTION

The filer has UNIX-compatible remote shell capability that enables you to execute

certain filer commands from a UNIX command line or shell script. It also enables

you to use a remote shell application on a PC to enter filer commands.

The

/etc/hosts.equiv

file controls which hosts have access to the filer remote

shell. The hosts listed in the

/etc/hosts.equiv

file are called trusted hosts. The

filer accepts commands from the filers administrative users only if the com-

mands are entered through a remote shell.

To see a list of filer commands that can be executed through

rsh

, enter the

rsh

command on the trusted host.

EXAMPLE

The following example shows how to enter the

version

command from a trusted

host named adminhost through a remote shell:

adminhost%

rsh

-l

root

filer

version

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 584 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: