manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 121 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 121

Disk and File System Management3-25

5HYHUWLQJD9ROXPHWRD6HOHFWHG

6QDS6KRW

'HVFULSWLRQ

Use SnapRestore to revert a volume to a snapshot. You can use this feature at any 

time. After you enter the command for reverting a volume, the filer reboots with the 

volume containing the same data as it did when the snapshot was taken.

3UHUHTXLVLWHV

You must meet these prerequisites before using SnapRestore:

‡

SnapRestore is a licensed feature. You must enter the 

snaprestore

 license 

code before you can revert a volume to a snapshot.

‡

Snapshots must exist on the filer so that you can select one snapshot for the 

reversion.

‡

The volume to be reverted must be on-line.

‡

The volume to be reverted must not be a mirror used for data replication.

&DXWLRQV

Be sure that you understand the following rules before reverting a volume:

‡

SnapRestore overwrites all data in the volume. After you use SnapRestore to 

revert to a selected snapshot, you cannot undo the reversion.

‡

When you revert a source volume for data replication, try not to select a snapshot 

taken before the SnapMirror snapshot. If you must revert to a snapshot taken 

before the SnapMirror snapshot, the filer can no longer perform an incremental 

update of the mirror; it must recreate the base-line version of the mirror.

‡

Snapshot deletions are irrevocable. If you delete a snapshot, you cannot recover 

the snapshot by using SnapRestore.

‡

After you revert a volume to a selected snapshot, you lose all the snapshots that 

were taken after the selected snapshot. 

‡

Reverting the root volume causes the filer to reboot with configuration files that 

were in effect when the snapshot was taken.

6WHSV

To revert one or more volumes, perform the steps that follow. At any time before you 

enter 

y

 in the last step, if for some reason, you do not want to proceed with the vol-

ume reversion, enter Ctrl-C.

1.

Notify network users that you are going to revert a volume so that they know the 

current data in the volume will be replaced by that of the selected snapshot. NFS 

users can unmount the files and directories in the volume before the reversion. If 

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments