manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 249 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 249

HTTP Administration 8-9

7KH5HGLUHFW5XOH

The redirect rule specifies that if a component of a URL matches the template, the 

request is redirected to the URL defined in the 

result

 field. The 

result

 field for 

the redirect rule must be specified as a complete URL beginning with 

http://

 and the 

host name.

For example, if 

/etc/httpd.translations

 contains the following entry

UHGLUHFWFJLELQKWWSFJLKRVW

the filer redirects CGI requests to another HTTP server named cgi-host. This is essen-

tial for calls to 

cgi-bin

 because the filer does not execute them.

7KH3DVV5XOH

The pass rule specifies that if a component of a URL matches the template, the filer 

accepts the request, processes the request as is, and disregards other rules. 

For example, if 

/etc/httpd.translations

 contains the following entry

SDVVLPDJHELQ

the filer processes the request for any URL containing 

/image-bin

 as is, even though 

there is another rule specified as follows:

PDSLPDJHELQXVUORFDOKWWSLPDJHV

If the pass rule includes the 

result

 field, the filer accepts the request, processes 

the request by using the URL defined in the 

result

 field, and disregards other 

rules.

7KH)DLO5XOH

The fail rule specifies that if a component of a URL matches the template, the filer 

denies access to that component and disregards other rules. 

For example, if 

/etc/httpd.translations

 contains the following entry

IDLOXVUIRUELGGHQ

the filer does not provide access to the 

/usr/forbidden

 directory.

+RZWKH)LOHU3URFHVVHV5XOHV

The filer processes the rules defined in 

/etc/httpd.translations

 in the order they are 

listed, and applies the rule if the URL matches the template. However, the filer stops 

processing other rules after it applies a pass or fail rule.

In the 

template

 or 

result

 field of an 

/etc/httpd.translations

 entry, you can use 

asterisks (*) as wildcard characters, as follows:

‡

In the 

template

 field, the wildcard character matches zero or more characters, 

including the slash (/) character.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments