manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 157 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 157

File Sharing Between NFS and CIFS Users 5-1

& + $ 3 7 ( 5  

)LOH6KDULQJ%HWZHHQ1)6DQG

&,)68VHUV

$ERXW7KLV&KDSWHU

$ERXW)LOH6KDULQJ

This chapter describes how the filer works with NFS and CIFS clients simultaneously. 

Because these clients interact with a file server differently, you need to understand 

how the read and write operations performed by one client affect the operations per-

formed by the other client. 

)LOH/RFNLQJ,QWHUDFWLRQV

$ERXW7KLV6HFWLRQ

This section describes in general what happens when a client program using one pro-

tocol tries to read or write a file that is currently used by a client program using a 

different protocol in an environment consisting of CIFS and NFS users. For details 

about locking in a particular protocol, consult the documentation for that protocol.

7\SHVRI&OLHQWV

There are CIFS clients and NFS clients.

7\SHVRI/RFNV

NFS locks are advisory, while CIFS locks are mandatory. CIFS applications depend on 

locking to behave properly. Because NFS locks are only advisory, file-manipulation 

operations, such as 

rm

, 

rmdir

, and 

mv

, by a UNIX-based NFS client on a file opened 

by a (PC)NFS application can cause the application to crash.

Reads by UNIX-based NFS clients always succeed.

A deny-write operation causes a file-manipulation operation, such as 

rm

, 

rmdir

, and 

mv

, on a CIFS-accessed file by a UNIX-based NFS client to fail. 

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments