Cooper Security i-On 40, Engineering Manual

Page: 187 / 228

i-on Range Step by Step Programming Procedures
Page 177
14. Press

.
The display shows the first of any exceptions
available. (See page 173). The end of the
bottom line shows ―Yes‖ if the exception
applies to that event, or ―No‖ if it does not.
(Note that the exception description can be
programmed, and may differ from that shown
here.)


15. Press

repeatedly to change the ―Yes‖ to a
―No‖ and back again, as required.


16. Press

or

to see the other available
exceptions. Press

to change their state as
required.


17. Press

when you have finished applying
exceptions.
The display shows:


18. Carry on with any other programming that
you need to do. DON‘T FORGET to leave the
Installer Menu in order to save the changes
you have made (see page 12 ).
To edit an event:
1. Enter Installer Menu.


2. Press

until the display shows:
(For a part set system the bottom line of the
display shows ―Setting Options‖.)


3. Press

.
(For a part set system the display shows
―Setting Options Full Set‖.)


4. Press

until the display shows:
(For a part set system the display shows:
―Setting Options Calendar Set‖.)


5. Press

.

