Cooper Security i-On 40, Engineering Manual

Page: 144 / 228

Step by Step Programming Procedures i-on Range
Page 134
bus.
7. Press

or

until the display shows the
expander you wish to delete (in this example,
expander W1-04):


8. Press

.
The display asks you to confirm that you want to
delete the selected device:
Notes: If you change your mind and do NOT wish to
delete the device shown then press

.


9. Press

.
The display shows a brief message to confirm
the deletion:
...followed by the Delete Expander option.
The control unit deletes its record of the
expander you selected in step 7, and also
defaults the expander‘s own record of the bus
address. If you wish to re-instate the expander
you must add it as a new expander – see page
130).




10. Press

until the display shows:


11. Press

.
The display shows:


After a short time (depending on the number of
bus devices fitted to the system) the display
shows the time and date:


12. Power down the system and disconnect the
device from the bus.
13. Power up the system again.
Expanders
30 50 160
To Disable or Enable an Expander:
1. Enter Installer Menu.


2. Press

.
The display shows:

