Cooper Security i-On 40, Engineering Manual

Page: 148 / 228

Step by Step Programming Procedures i-on Range
Page 138
The keypad display shows for a few seconds:
Followed by:




14. Leave the Installer Menu.
The new expander now has the programming of
the old expander.
Note: If you replace a wireless expander then you must teach the identity of
the new wireless expander to any receivers that had previously learned
the old wireless expander’s identity. This includes any 762s, 768s or
WAMs.
Naming Wired and Radio Expanders
1. Enter Installer Menu.


2. Press

.


3. Press

until the display shows EITHER (if you
are adding a wired expander):
OR (if you are adding a radio expander):




4. Press

.
(The rest of these instructions assume you are
naming a wired expander. The same instructions
will also work for a radio expander.)


5. Press

until the display shows:


6. Press

.


7. Press

or

to select the expander that you
wish to name. Then press

.
The bottom line of the display shows ―Name‖.


8. Press

.
The bottom line of the display shows the
expander‘s current name. The cursor is on the
first character on the left.

