Cooper Security i-On 40, Engineering Manual

Page: 154 / 228

Step by Step Programming Procedures i-on Range
Page 144
9. Press

to confirm your choice.
After a brief message confirming the action the
control unit has taken the bottom line of the
display shows the zone ready to learn in a new
radio detector.


To reinstate the detector you must teach the control unit that detector's
identity again (see page 141).
Deleting all radio detectors
1. Enter Installer Menu.


2. Press

.


3. Press

.


4. Press

.
30 50 160 On an i-onEX range control unit
the bottom line of the display shows the first of
the radio expanders.


16 40 On an i-on16 or i-on40 the display
shows the first in a list or the radio zones.


5. Press

until the bottom line of the display
shows ―Delete All‖.


6. Press

.
The display shows a message asking you to
confirm your choice. (Press

if you want to
change your mind.)


7. Press

.
The display shows a second message asking you
to confirm your choice. (Press

if you want to
change your mind.)
Note: The deletion will take place immediately, and
not when you leave Installer Mode.


8. Press

to confirm your choice.
After a short message confirming that the
control unit has deleted all the radio detectors
the display returns to the Delete All menu.


To reinstate the detectors you must teach the control unit each detector's
identity again (see page 141).