Cooper Security i-On 40, Engineering Manual

Page: 171 / 228

i-on Range Step by Step Programming Procedures
Page 161
8. Press

or

to see other available WAM
device addresses:


9. Press

when the display shows the WAM
device address you wish to use.


10. Operate the WAM‘s tamper.
The WAM signals its identity to the i-on160EX
control unit. When the control unit learns the
WAM‘s identity the keypad gives a double
beep.


11. Press

The display shows that the control unit has
learned the WAM‘s identity and given it a
default name (WAM 01).


12. Don‘t forget to restore the tamper on the WAM
you have just learned.
Naming a WAM
To give a WAM a meaningful name:
1. Enter Installer Menu.


2. Press

.


3. Press

until the display shows:


4. Press

.


5. Press

until the display shows:


6. Press

.
The display shows the first in a list of the
WAMs that the panel has learned:


7. Press

or

until the bottom line of the
display shows the WAM that you wish to
name:

