Cooper Security i-On 40, Engineering Manual

Page: 173 / 228

i-on Range Step by Step Programming Procedures
Page 163
the display shows:
Go to step 8.

6. Press

or

to select the radio expander
allocated to the WAM you wish to delete.
Note: This example assumes that your radio
expanders are bus devices 02 and 05. The
numbers may be different on the system you
are working on.


7. Press

.
The display shows the first in a list of the
available WAM device addresses on the
selected expander.


8. Press

or

until you see the WAM you wish
to remove:


9. Press

.
The bottom line of the display asks if you wish
to delete the selected WAM.


10. Press

.
The bottom line of the display asks you to
confirm that you wish to delete the WAM.


11. Press

.
The control unit removes the identity of the
WAM from that WAM device address (note that
the ―*‖ has gone from the beginning of the
bottom line).
The display shows that the control unit is now
ready to select another WAM.


Outputs
Adding Radio Outputs
To teach the control unit's identity to a 762r, 768r or 769r:
1. Enter Installer Menu.


2. Press

until the display shows:

