Cooper Security i-On 40, Engineering Manual

Page: 206 / 228

Appendix II i-on Range
Page 196
Alarm Response = Siren (Local)
Full Set Link P2 = Yes
P3 = Yes
System Options Wired Zone Type Select FSL if using all wired detectors
Confirmation Mode DD243 or BS8243

Confirmation
Time
30 mins
 After Entry 2 zones
 Entry keypad
Lock
On
 Sounder on Unconfirmed
 Siren on Unconfirmed
 Unconfirmed
reset
User
 Confirmed Reset Installer
Keypad Text Enter Name of installer company
Siren Delay (default 0 mins)
Siren Time (default 15 mins)
Force Set Off
CSID Enter 4 digit ARC Scantronic reset code (if
required)
Silence Alerts User
User Programming
User Code Type Partitions
01 1234 Master User Whole system – P2 + P3
02 2222 Partition user P2 (Factory)
03 3333 Partition user P3 ( Office)
User Operation
To set:
Full System User 01 enters code or Prox and selects a
Partition.
(User 01 can select an individual Partition or full
set the whole system.)
Factory only
(Partition 2) Partition 2 User enter Code or Prox in Keypad 2
Office only
(Partition 3) Partition 3 User enter Code or Prox in Keypad 1
To Unset:
First user to enter keys in their code or presents a
Prox tag
If User 02 (a member of the Factory department) sets their Factory partition
and the Office partition is already set, then the common foyer area will also
start to set. When the user closes the Front Door (zone 1) the whole system
sets and the alarm response is raised to Full alarm (Siren + Comms).