Cooper Security i-On 40, Engineering Manual

Page: 108 / 228

Installer Menu Options i-on Range
Page 98
SMS
Deals with setting up text messages, selecting the
alarm types that will trigger them an selecting their
destinations.
i-on16+i-sd01, i-
on30EXD, i-sd02, i-
dig02, i-gsm02
Line Fail Reporting
Allows you to select how the control unit reports a
communications failure.
i-on16+i-sd01, i-
on30EXD, i-sd02, i-
dig02, i-gsm02
IP Network (Own)
When NO Ethernet or GPRS module is fitted this sub-
menu deals with setting the control unit‘s own IP
address and access to the built in web-server.
With an Ethernet module is fitted this sub-menu
ALSO allows you to set up the IP address and other
parameters for any attached Ethernet or GPRS
modules.
These extra sub-menus will not appear if
the modules are not fitted.
40 50 160
IP Network (Own)
For i-on16 and i-on30EX the IP Network (Own) sub-
menu allows you to set up the IP address and other
parameters for any attached Ethernet or GPRS
modules.
These control units do NOT have a web
server based programming interface.
16 30
Downloading
Deals with setting up phone numbers, account
numbers for the downloader, and controlling the type
of connection you wish to allow.
30 40 50 160
The control unit is designed to alert the user if it fails to complete a
programmed communication. If alarm reporting fails then the keypad displays
an alert by lighting the red LEDs around the navigation keys. Although the user
may acknowledge the alert, the control unit will not remove the alert until
communication is completed successfully.
If you wish to remove a communications module from a system, ensure that
you first disable communications in the appropriate menus:
To remove a: Disable:
i-sd01, i-sd02, i-
gsm02
ARC Reporting, Speech Dialler, SMS
i-dig02 ARC Reporting, SMS
GPRS, Ethernet ARC Reporting, IP Network
Otherwise the control unit will continually report a communications failure.
ARC Reporting
Note: The i-on30EXD has a built-in digital communicator. Plugging in a
communications module disables the built-in communicator. The ARC
Reporting option then applies to the plug-in module (NOT the built-in
module).