Cooper Security i-On 40, Engineering Manual

Page: 153 / 228

i-on Range Step by Step Programming Procedures
Page 143
Deleting individual radio detectors
1. Enter Installer Menu.


2. Press

.


3. Press

.


4. Press

.
16 40 On an i-on16 or i-on40 the display
shows the first in a list or the radio zones. Go to
step 6.


30 50 160 On an i-onEX range control unit
the bottom line of the display shows the first of
the radio expanders. Go to step 5.


30 50 160
5. Press

or

to show the expander you want
and press

.
The bottom line of the display shows the first of
the radio detector zones belonging to the
selected expander.
The display shows an ―*‖ next to zones where
the control unit has already learned detectors.


6. Press

or

keys to show the zone you wish to
delete.


7. Press

.
The bottom line of the display shows the first of
two options: deleting the detector ID or of
defaulting the zone.


8. Press

or

to see each of these choices.


If you select ―Delete Detector ID‖ then the
control unit ―forgets‖ the ID of the detector, but
leaves any zone programming in place.


If you select ―Default zone‖ then the control unit
―forgets‖ the ID of the detector
and sets all the
zone programming back to default values: Type
= Not Used, no attributes.


Note: Either option acts as soon as you confirm it,
and not when you leave Installer Mode.