Cooper Security i-On 40, Engineering Manual

Page: 150 / 228

Step by Step Programming Procedures i-on Range
Page 140
press

or

until the end of the bottom line
shows ―No‖. You can allocate and expander to
more than one Partition. See page 69 for more
information about partitions.
To allocate (or remove) an expander to or from
all Partitions in one go:
Press

or

until the bottom line of the display
shows ―All Partitions‖.
Press

or

until the end of the bottom line
shows ―Yes‖ or ―No‖ as required.


11. Press

to show other partitions.
Press

or

to allocate or remove partitions as
required.


12. Press

to confirm your changes.


13. Carry on with any other programming that you
need to do. DON‘T FORGET to leave the Installer
Menu in order to save the changes you have
made (see page 12 ).
Changing the Wiring Type of Wired Expanders
1. Enter Installer Menu.


2. Press

.


3. Press

until the display shows:


4. Press

.


5. Press

.


6. Press

.


7. Press

or

to select the expander that you
wish to edit. Then press

.
The bottom line of the display shows ―Name‖.


8. Press

until the display shows:

