Cooper Security i-On 40, Engineering Manual

Page: 178 / 228

Step by Step Programming Procedures i-on Range
Page 168
9. Press

or

until the display shows the
output you wish to edit, for example:
16 40 Note: The top line of the display
will show a single output number, not an
expander connection point.


10. Press

.
Note: If the output has the type “Not Used” you
will not be able to change its name. The
bottom line of the display will show the
“Type” option. Go to page 165 to change the
type of the output.


11. Press

.
The bottom line of the display shows the
output‘s current name. The cursor is on the
first character on the left.


12. See page 18 for hints on how to edit names.


13. Press

to save the text.


14. Carry on with any other programming that
you need to do. DON‘T FORGET to leave the
Installer Menu in order to save the changes
you have made (see page 12 ).
Giving a Wired Output a Type:
1. Enter Installer Menu.


2. Press

until the display shows:


3. Press

.


4. Press

.


5. Press

.