Cooper Security i-On 40, Engineering Manual

Page: 179 / 228

i-on Range Step by Step Programming Procedures
Page 169
30 50 160 On an i-onEX range control
unit the display shows the first group of wired
outputs available for editing: those on the
panel.
Go to step 6.


16 40 On an i-on40 control unit the
display shows:
Go to step 8.


30 50 160
6. If required, press

or

until the display
shows the expander whose outputs you wish
to edit.


30 50 160
7. Press

.
The top line of the display shows the first in a
list of the wired outputs on the expander, for
example:


8. Press

or

until the display shows the
output you wish to edit, for example:
If the bottom line of the display shows ―Not
Used‖ then the output does not currently
have a type assigned to it.
If the bottom line of the display shows an
output type then the output already has a
type assigned to it.
16 40 Note: The top line of the display
will show a single output number, not an
expander connection point.


9. Press

.


Note: If the bottom line of the display shows
“Name” then press

to display the “Type”
option.
10. Press

.
The bottom line of the display shows the
output‘s current type. A ―*‖ at the begining of
the line is there to remind you of the current
type if you scroll down the type list. .

