Cooper Security i-On 40, Engineering Manual

Page: 163 / 228

i-on Range Step by Step Programming Procedures
Page 153
9. Press

.
The bottom line of the display shows :


10. Press

.


11. To allocate a radio keypad to a partition press

or

until the end of the bottom line shows
―Yes‖. To remove a radio keypad from a partition
press

or

until the end of the bottom line
shows ―No‖. You can allocate a keypad to more
than one Partition. Press

or

to see the other
partitions. See page 69 for more information
about partitions.


If you want to allocate a keypad to all partitions
at once:
Press

or

until the bottom line shows ―All
Partitions‖.
Press

or

until the end of the bottom line
shows:
Either ―Yes‖ to allocate the keypad to all
partitions
Or ―No‖ to remove the keypad from all partitions
except partition 1.


12. Press

to confirm your changes.


13. Carry on with any other programming that you
need to do. DON‘T FORGET to leave the Installer
Menu in order to save the changes you have
made (see page 12 ).
Naming and Programming Quick Set Keys
30 40 50 160
Note: This procedure applies equally to wired keypads or radio keypads. The
examples shown are for wired keypads. You cannot program Quick Set
keys in a part setting system.
1. Enter Installer Menu.


2. Press

.


3. EITHER:
Press

until the display shows:

