Cooper Security i-On 40, Engineering Manual

Page: 159 / 228

i-on Range Step by Step Programming Procedures
Page 149
Adding a Radio Keypad
To make the control unit learn a Radio Keypad‘s identity.
1. Enter Installer Menu.


2. Press

.


3. Press

until the display shows:


4. Press

.


5. Press

.
30 50 160 On an i-onEX range control unit
the bottom line of the display shows the first of
the available radio expanders:
Go to step 6.


16 40 On an i-on16 or i-on40 control unit
the bottom line of the display shows:
Go to step 8.


30 50 160
6. Press

or

to select the expander that you
wish allocate the radio keypad to.
Note: This example assumes that your radio
expanders are bus devices 02 and 05. The
numbers may be different on the system you
are working on.


7. Press

.
The bottom line of the display shows the first of
the device addresses used for radio keypads on
the expander. (See page 24 for an explanation of
radio keypad numbering.) If a radio keypad is
already learned into the system at this address
then the bottom line of the display shows a ―*‖
on the left and displays the radio keypad‘s name.


8. Press

or

to select the device address that
you wish use.


9. Press

.
The bottom line of the display instructs you to
operate the keypad tamper.

