i-on Range
Page 40
Installer Menu Options
This section contains reference information for the options provided in the
Installer Menu.
Detectors/Devices
Detectors
Adding or Deleting Radio Detectors
Add a Radio Detector To The System
To learn radio detectors select
Detectors/Devices - Detectors
–
Add/Delete Detectors.
See page 141 for detailed instructions.
To use a radio zone the control unit must learn the identity of the radio
detector.
When learning detectors on an i-onEX range control you first select a radio
expander to assign that detector to, and then learn the detector‘s identity.
Remember that EXP-R10 expanders can learn 10 radio detectors, while EXP-
R30 expanders can learn 30 detectors. (Note that the i-on30EX and i-on30EXD
can only use the first 20 zones of those provided by the EXP-R30.)
Deleting All Radio Detectors From The System
If you wish to remove all the radio detectors from the system first select
Detectors/Devices - Detectors
–
Add/Delete Detectors.
Then:
On an i-on16 or i-on40 press
and you will see
Delete All
on the bottom
line of the display.
On an i-onEX control unit, when the display shows the first radio expander,
press
and you will see
Delete All
on the bottom line of the display.
See page 144 for detailed instructions.
When you delete all radio detector the control unit sets all radio zones to Not
Used, and erases the identities of all the radio transmitters that it has learned.
Deleting All Zones From A Radio Expander
30 50 160
To delete all detectors from a single wireless expander then select
Detectors/Devices - Detectors – Add/Delete Detectors
from the Installer Menu. The
bottom line of the display shows the first of the radio expanders. Press
or
to display the expander you wish to delete detectors from. Press
to select
the expander. The bottom line of the display shows the first of the zones
belonging to that expander. Press
and will see
Delete All
on the display. Press
to select the option. The display asks you to confirm your choice. Press
to
finish deleting all the detectors from the expander, or
if you wish to keep the
detectors.
If you press
the control unit sets all zones belonging to the expander to Not
Used, and deletes the identities of all radio transmitters assigned to the
expander.
Summary of Contents for i-On 40
Page 1: ......
Page 10: ...i on Range Page x This page is intentionally blank...
