Cooper Security i-On 40, Engineering Manual

Page: 168 / 228

Step by Step Programming Procedures i-on Range
Page 158
11. To allocate a radio siren to a partition press

or

until the end of the bottom line shows
―Yes‖. To remove a radio siren from a partition
press

or

until the end of the bottom line
shows ―No‖. You can allocate the radio siren to
more than one partition. Press

or

to see
the other partitions. See page 69 for more
information about partitions.
Note: By default all sirens are assigned to all
partitions.


If you want to allocate a radio siren to all
partitions at once:
Press

or

until the bottom line shows ―All
Partitions‖.
Press

or

until the end of the bottom line
shows:
Either ―Yes‖ to allocate the siren to all
partitions
Or ―No‖ to remove the siren from all partitions
except partition 1.


12. Press

to show other partitions.
Press

or

to allocate or remove partitions
as required.


13. Press

to confirm your changes.


14. Carry on with any other programming that you
need to do. DON‘T FORGET to leave the
Installer Menu in order to save the changes you
have made (see page 12 ).
Deleting a Radio Siren
To remove a radio siren from the system:
1. Enter Installer Menu.


2. Press

.


3. Press

until the bottom line of the display
shows:


4. Press

.

