Cooper Security i-On 40, Engineering Manual

Page: 17 / 228

i-on Range Introduction
Page 7
Grade 2 The system uses four digit user codes, turns Masking OFF, defaults
User Reset – Tampers to ―yes‖, and ensures that ―Tampers‖ are
communicated as ―Alarms‖.
Grade 3 The system uses six digit user codes, turns Masking ON, defaults
User Reset – Zone Tampers and User Reset – Zone Alarms to
Installer. The system communicates tampers as tampers, and also
defaults the Omittable zone attribute to ―No‖.
You can override any of the settings by selecting individual options in other
parts of the Installer Menu. Note that if you do so then the system may no
longer comply with the selected Grade.
User Codes
When using four digit access codes, the default Installer code is ―7890‖ and the
default User 001 (User 01) code is ―1234‖.
When using six digit access codes the default Installer code is ―567890‖, and
the default User 001 (User 01) code is ―123456‖.