Club Car Carryall 300 2021, Maintenance And Service Manual

Page: 465 / 596

GASOLINE VEHICLE - TRANSAXLE Transaxle Removal
24
838
Figure 24-10 Disconnect Rear Shackles
839
Figure 24-11 Disconnect Front of Leaf Spring
14. Position floor jack under rear crossmember of chassis or trailer hitch mount (if equipped) (Figure 24-12, Page
24-11) . See WARNING “Lift only one end of the vehicle...” in General Warnings on page 1-1.
15. Raise vehicle just enough to relieve weight on leaf springs, then remove bolts securing leaf springs to shackles
(Figure 24-10, Page 24-11) .
16. Remove bolts securing front of leaf springs (Figure 24-11, Page 24-11) .
A
A. Chassis higher than transaxle.
3061
Figure 24-12 Raise Vehicle and Support On Jack Stands
17. Continue raising vehicle until chassis is higher than the top of the transaxle (i.e. enough to allow powertrain to be
rolled out from under vehicle)
(Figure 24-12, Page 24-11) . Position jack stands, adjusted to support the vehicle at
this height, under the frame crossmember between the leaf spring mounts and side stringers, just forward of each
rear wheel. Lower the floor jack to allow the jack stands to support the vehicle.
18. Remove floor jack from beneath vehicle.
19. Grasp ends of leaf springs at rear of vehicle and carefully pull the powertrain until snubber at front of engine pan
is free of the chassis. Gently lower front of powertrain to the floor
(Figure 24-13, Page 24-12) . The powertrain
should be completely disconnected from vehicle and resting on floor.
2021 Carryall 300 Maintenance and Service Manual Page 24-11